ESC-CLO100-T5
ESC-CLO100-T5 Clean Oven
ESC-CLO100-T5 Clean Oven is designed for clean thermal processing. Configuration for this model: Internal Chamber Dimensions: 500*500*400 mm; Operating Temperature Range: 25~500 ℃.
Use the material acceptance endpoint to compare equipment configurations; confirm each capability on the selected model.
Assess filtered circulation when material acceptance includes particle deposition or surface cleanliness; compare ovens with the same load and detection method rather than by equipment names alone.
Define the particle-contamination target and location: chamber air, part surfaces or package interiors, with agreed idle and operating conditions.
Check filter temperature compatibility, installation seals, circulation paths and service access; placement in a cleanroom does not establish internal oven cleanliness.
Test particle deposition and temperature distribution with actual trays and packaging; record recovery after loading, unloading and filter replacement.
Clean drying and sterilisation have different process endpoints; a sterilisation claim requires its own validation and cannot be inferred from temperature or a clean-air configuration.
Record the initial sample condition, loading layout, recipe version and raw measurements. Agree the acceptance endpoint before the trial; repeat at challenging load positions and compare the finished material result.
Candidate models in the current catalogue: ESC-CLO100-T5, ESC-CLO211-T5, ESC-CLO423-T5, ESC-CLO4500-T5. These are comparison candidates, subject to the process checks above.
The following specifications apply only to the models listed: