Knowledge Hub

Vacuum degassing process verification and risk control for potting glue：For potting adhesive, check container headspace and delay after mixing and validate actual potted cross-sections. Observe foaming and overflow on a small charge before setting container headspace and staged evacuation; lower pressure alone is not the objective.

Key points for selecting vacuum degassing equipment for potting glue：For potting adhesive, check container headspace and delay after mixing and validate actual potted cross-sections. Observe foaming and overflow on a small charge before setting container headspace and staged evacuation; lower pressure alone is not the objective.

Validation and risk control of low-temperature defoaming process for epoxy resin：For low-temperature epoxy degassing, monitor viscosity and working life to avoid premature thermal curing. Assess results from cross-section bubbles, cured voids or bond performance, and record the delay between mixing and treatment.

Key points for selecting epoxy resin low-temperature defoaming equipment：For low-temperature epoxy degassing, monitor viscosity and working life to avoid premature thermal curing. Assess results from cross-section bubbles, cured voids or bond performance, and record the delay between mixing and treatment.

Silicone material bubble removal process verification and risk control：For silicone, inspect vacuum foaming, gas re-entry after venting and cured voids at a fixed container depth. Set the degassing window from viscosity, working life and curing progress; weigh the benefit of thermal thinning against premature curing.

Key points for selecting bubble discharge equipment for silicone materials：For silicone, inspect vacuum foaming, gas re-entry after venting and cured voids at a fixed container depth. Set the degassing window from viscosity, working life and curing progress; weigh the benefit of thermal thinning against premature curing.

Degassing process verification and risk control after mixing of packaging materials：For post-mixing degassing, fix mixing method, material temperature and waiting time to avoid changes in starting conditions. Observe foaming and overflow on a small charge before setting container headspace and staged evacuation; lower pressure alone is not the objective.

Key points for selecting degassing equipment after mixing packaging materials：For post-mixing degassing, fix mixing method, material temperature and waiting time to avoid changes in starting conditions. Observe foaming and overflow on a small charge before setting container headspace and staged evacuation; lower pressure alone is not the objective.